COMP Cams #1411-16* Magnum Roller Rockers
The Worlds Best High Performance Street Rocker Arms
Fits: BB Chevy 396 402 427 454
7/16" Rocker Stud
*Must have screw in studs and guide plates
COMP Cams® Magnum Roller Rockers are the ultimate street rocker. Thatís because they were designed with the serious performance enthusiast in mind. They will help your engine make more power and last longer. Magnum Roller Rocker Arms are:
Magnum Roller Rocker Arms are made from 8620 chromemoly steel. This makes them stronger than die cast aluminum or stamped steel rockers. This superior material, along with the Magnumís super stiff design, assures maximum lift because this rocker arm will not flex.
You canít get maximum horsepower from your engine if your rocker ratio is off. We checked other rockers and found rockers that were as much as .040Ē short on lift. The Magnum Rockers are super Accurate. They check dead on every time.
The Magnum Roller Rockers can make between 15 and 30 horsepower over other rockers! Why? The secret is that not only does the roller tip reduce friction, the Magnum Rockers™ incredibly stiff design and super accurate ratios yield more effective valve lift.
The roller tip design reduces friction by not scrubbing the valve end or pushing the valve stem hard against the valve guide. This in conjunction with super strong design of the rocker makes for a simple, bulletproof, and cost effective combination.
Magnum Roller Rockers can be used with all High Energy, Magnum, Xtreme Energy, Nitrous HP, Xtreme 4X4 and Xtreme Marine Camshafts as well as any other hydraulic or solid cam WHERE OPEN SPRING PRESSURES DO NOT EXCEED 350 lbs
Magnum Roller Rockers
*50-state legal for 1993 and older GM vehicles equipped with 200 c.i.d. (4.2L) to 454 c.i.d. (7.4L) gasoline engines. C.A.R.B. E.O. #D-279-4